Hybrid Inverter Venus_3680/4000/4600/5000/6000-S1
- Hybrid energy storage inverter and photovoltaic inverter facilitates easy and fast installation.
- As the switching time between on-grid and off-grid is less than 10 ms, the load is therefore continuously supplied.
- There are four modes to be selected for various scenarios.
- APP remote monitoring, simple maintenance, unlimited function expansion, and good battery compatibility make this product ease to use.
- This product supports lead-acid, lithium battery, etc.
- Built-in smart grid management meets the demand for grid dispatching.
| Technical parameters: | Venus 4000-S1 | Venus 5000-S1 | Venus 6000-S1 |
| Battery specifications | |||
| Battery type | lithium ion battery, lead-acid battery | ||
| Battery rated voltage | 48 V | ||
| Battery voltage range | 42-58 V | ||
| Battery capacity recommended | 50-2000 Ah | ||
| Maximum charging and discharging power | 4000 W | 5000 W | 5000 W |
| Maximum charging current | 100 A (settable) | ||
| Maximum discharging current | 100A (adjustable) | ||
| Charging curve (lithium ion battery) | BMS | ||
| Charging curve (lead-acid battery) | 3-stage adaptive maintenance | ||
| Depth of Discharge | lithium ion battery: 0-90% adjustable, lead-acid battery: 0-50% adjustable | ||
| Maximum DC power of single channel MPPT | 3500 W | ||
| Maximum input voltage | 600 V | ||
| Start-up input voltage | 100 V | ||
| Rated input voltage | 360 V | ||
| MPPT voltage range | 120 V- 580 V | ||
| Full load DC voltage range | 200 V-520 V | 250 V-520 V | 300 V-520 V |
| Number of independent MPPT | 2 | ||
| Number of DC inputs | 1/1 | ||
| Maximum input current | 13 A/13 A | ||
| Maximum short circuit current | 18 A /18 A | ||
| Maximum AC power | 4400 VA | 5500 VA | 6000 VA |
| Maximum output current | 20 A | 25 A | 27.3 A |
| Nominal grid voltage | L/N/PE, 220 VAC, 230 VAC, 240 VAC | ||
| Nominal AC voltage range | 180 VAC-276 VAC (according to local standard) | ||
| Rated grid frequency | 50 Hz/ 60 Hz | ||
| Grid frequency range | 45 Hz-55 Hz/54 Hz-66 Hz (according to local standard ) | ||
| Active power adjustable range | 0~ 100% | ||
| Total harmonic component (current) | <3% | ||
| Power Factor | 1 (+/-0.8 adjustable) | ||
| Maximum output current | 18.2 | 22.7 | 22.7 |
| Peak output power, time | 4800 VA,60 s | 6000 VA,60 s | 6000 VA,60 s |
| Nominal output voltage, frequency | 220 V/230 V,50/60 Hz | ||
| Voltage total harmonic distortion (@ linear load) | <3% | ||
| Switching time | <10 ms | ||
| European weighted efficiency | ＜97.20% | ＜97.30% | ＜97.50% |
| Maximum charging and discharging efficiency of battery | ＜94.00% | ||
| MPPT efficiency | >99.9% | ||
| DC reverse connection protection | available | ||
| Ground fault monitoring | available | ||
| Over-current protection | available | ||
| DC switch | available | ||
| Battery soft start protection | available | ||
| AFCI protection | optional | ||
| Lightning protection | Class III | ||
| Ambient temperature range | General parameters -30 ~ + 60 ℃ (Rating reduction occurs when the ambient temperate rises above 45 ℃.) |
| Stand-by loss | <10 W |
| Topology | high frequency isolation |
| Degrees of protection | IP65 |
| Relative Humidity range allowed | 0~ 100% |
| Communication | CAN 2.0/RS 485, Wi-Fi/GPRS (optional) |
| Protection level | Class I |
| Maximum altitude for product operation | <4000 m |
| Connection mode of current sensor | external |
| Noise | <29 dB |
| Weight | 27 kg |
| Cooling mode | natural cooling |
| Dimension (mm) | 540*380*185 |
| Display | LCD & APP |
| Warranty | 5 years (extendable) |
| Standard | |
| EMC | EN 61000-6-1, EN 61000-6-3 |
| Safety regulations and standards | IEC62109-1,IEC62109-2 |
| Grid-connection standard | IEC61727，IEC62116,IEC-61683，VDE-AR-N 4105, VDE V 0124-100，AS4777 |
