Powercube 100K-200HT Technical parameters
Technical parameters: | Powercube 100K-200HT |
|
Battery configuration |
Battery type | LFP 280 Ah |
PACK configuration | 14.336kWh/1P16S |
Battery system configuration | 200kWh/1P224S |
Voltage Range | 627.2-806.4 Vdc |
| AC parameters (on-grid ) |
Rated power | 100 kW |
Maximum charge and discharge power | 110 kVA |
Rated grid voltage | 400, 3W+N+PE |
Grid voltage range | 360-440 Vac |
rated current | 150 A |
Maximum Current | 160 A |
Rated grid frequency | 50 Hz |
Allow grid frequency fluctuations | ±5 Hz |
Power Factor Range | ﹣1~+1 |
iTHD | <3%(Rated power) |
Parallel Capability | ≥5 |
Rated output power | AC parameters (off-grid ) 100 kVA |
Rated output voltage | 400,3W+N+PE |
Rated output frequency | 50 Hz |
Output Current | 150A (Linear load) /100A (Non-linear load) |
Total voltage harmonic distortion rate | < 3% (Rated conditions, resistive balance load) |
Size of battery cabinet |
System parameters 1250*1050*2350 mm(W*D*H) |
Weight of battery cabinet | ~2000 kg |
Protection level | IP55 |
Operating temperature range | ﹣30~+50℃ (>45℃Reduction) |
Operating humidity range | 0~95% (No condensation) |
Max. working altitude | 3000 m |
Cooling mode | Intelligent air-cooled |
Isolation mode | No transformer |
Communication interface | Ethernet |
Communication protocol | Modbus TCP |
System certification | EN IEC62477-1, EN IEC62619, IEC60730 Annex H, EN IEC61000-6-2, EN IEC61000-6-4, UN38.3 |
PCS certification | GB/T34120, IEC 62477-1, IEC61000-6/-2/-4; EN50549, CEI0-21 |