Жилой однофазный автономный инвертор для фотоэлектрической энергии Pebble серии Pebble 1000-S1~Pebble 6000-S1

This product is designed with digital control integrating MPPT PV controller and inverter.

This product provides pure sine wave output with superior performance of impact resistance.

The complementary control function for mains power serves to meet the needs of different users.

LED and LCD enables the display of real-time monitoring of inverter operation status and various operation parameters.

Технические paraметров:	Pebble 1000-S1	Pebble 2000-S1	Pebble 3000-S1	Pebble 4000-S1	Pebble 5000-S1	Pebble 6000-S1
Номинальная мощность	1000 W	2000 W	3000 W	4000 W	5000 W	6000 W
System voltage	24 V/48 V	24 V/48 V	24 V/48 V	48 V	48 V	48 V
Output voltage	220 V ±5％
Output frequency	50/60 Hz ±1％
Conversion efficiency	≥85%
Перегрузочная способность	When the load exceeds 110% – 120%, the product powers it off for self-inspection 1 minute after the occurrence of the overload. When the load exceeds 140%, the product powers it off for self-inspection 10 seconds after the occurrence of the overload. Shall the overload remain and exceed 160%, the product shuts down 300 micro second automatically.
Output waveform	pure sine wave

	Solar control
Charging mode	MPPT
Maximum power	1680/3360 W	1680/3360 W	1680/3360 W	3360 W	3360 W	3360 W
Максимальный ток зарядки	60 A
Photovoltaic input voltage range	70-150 VDC
Input current	170 VDC

	Other parameters
Display method	LCD + LED
Display contents	PV input voltage, PV charging current, battery voltage, mains input voltage, inverter output voltage, load capacity indication, working status, etc.
Режим охлаждения	fan cooling
Communication mode	RS232
Noise level	＜60 (1m)
Application altitude	≤ 3000 m Rating reduction shall be observed according to relevant standard when the application altitude rises above 3000 m.
Operating temperature	-10~45℃
Storage temperature	-15~70℃
RH range	0~90% RH Non-condensing
Application topology: